Locating lift points on larger trucks and vehicles can be challenging with a two-post lift if the arms are too short. Moving them closer together to reach lift points on especially long wheelbases makes it harder to find the vehicle's center of balance. However, BendPak's XPR-12CL-LTA makes this task incredibly easy. This lift is equipped with three-stage telescoping lift arms, offering a maximum range of 72 inches, surpassing the standard XPR-12CL with a range of 58 inches. This extended option allows you to find the center of balance on even the largest trucks, providing the versatility and power needed to safely lift vehicles up to 12,000 lbs.
The XPR-12CL-LTA is not only designed for hard-to-reach lifting points but also excels in handling bulkier and heavier trucks, including heavy-duty commercial vehicles. Its three-stage telescoping arms can collapse to a standard length, facilitating rapid adjustments to accommodate standard and compact vehicles of any size. With user-friendly controls and top-of-the-line safety features, the XPR-12CL-LTA is a perfect addition to any commercial garage.
As a clearfloor two-post lift, the XPR-12CL-LTA allows easy movement underneath. The overhead equalization beam provides ample room for shop equipment, such as toolboxes, transmission jacks, and oil drains. With BendPak's characteristic options and features, the XPR-12CL-LTA's capabilities are as extensive and versatile as its lifting arms.
Key Features:
- 12,000-lb. lifting capacity
- Padded overhead safety shutoff bar
- Extended height top-beam for greater clearance
- Single-point safety release
- Dual direct-drive hydraulic cylinders
- Dual-synchro equalization system for balanced lifting
- Oversized 53" tall carriage for superior strength and durability
- Electric/hydraulic power system
- Oversized A36 steel base plates
- Self-lubricating dura-glide UHMW polyethylene bearing system
- Safety locks in each column spaced every 3"
- Plated arm restraints and arm pins for rust prevention
- Heavy-duty 1/2" aircraft-quality equalizer cables
- Oversized cable sheave diameter reduces cable fatigue
- Durable rubber lift pads with stackable adapters
- 16-piece specialty adapter set includes four 6" stackable adapters, four 3" stackable adapters, four polyurethane contact pads, and four frame cradle pads
- Convenient storage included for truck and van adapters
- Long-reach triple-telescoping arms provide increased range for lifting point access
Specifications:
- Lifting Capacity: 12,000 lbs. (5,443 kg)
- Max Capacity/Front Axle: 6,000 lbs. (2,722 kg)
- Max Capacity/Rear Axle: 6,000 lbs. (2,722 kg)
- Rise: 69" (1,753 mm)
- Rise + Pad Only: 74" (1,880 mm)
- Rise + Pad + 63 mm Adapter: 80" (2,032 mm)
- Min. Height + Pad: 5" (127 mm)
- Height Overall: 170" (4,318 mm)
- Width Overall: 155" (3,937 mm)
- Outside Columns: 144" (3,658 mm)
- Inside Columns: 120" (3,048 mm)
- Drive-Thru Clearance: 106" (2,692 mm)
- Floor To Overhead Switch: 165" (4,191 mm)
- Front Arm Reach (MIN): 37" (940 mm)
- Front Arm Reach (MAX): 72" (1,829 mm)
- Rear Arm Reach (MIN): 37" (940 mm)
- Rear Arm Reach (MAX): 72" (1,829 mm)
- Max Load Per Arm: 3,000 lbs. (1,361 kg)
- Motor: 220 VAC / 60 Hz / 1 Ph
- Noise: 45 dB
Certification:
The XPR-12CL-LTA is ALI Certified, meeting the stringent safety standards set by the Automotive Lift Institute (ALI), the only nationally recognized and accredited organization for lift certification. This certification ensures structural integrity, design excellence, component quality, precise manual instructions, and compliance with production facility standards.
Additional Features:
- Triple-telescoping arm set for greater maximum reach and superior minimum retraction
- Low-profile, dropped-end frame contact pads for easy access to low-profile vehicles
- Optional column extension for increased overhead clearance to 192" overall height
- Maintenance-free load bearings made of ultra-high molecular weight polyethylene
- Single-piece columns for strength and durability
- Dual Direct-Drive technology for reliability, smoother operation, and less maintenance
- Single-point safety release for user-friendly operation
- Dual-synchro equalization system for balanced lifting mechanics
- Auto-shutoff with a rigid, padded safety shutoff
